The elbow joint kit allows multiple servos to be connected to each other, making it easy to create snake-like robots or appendages with multiple degrees of freedom.
This servo elbow joint kit allows you to connect two Joinmax Digital servos to create an elbow joint as shown to the right. The same set of parts is used in several of the elbow joints in the Joinmax Digital robotic arm. The joint allows the second servo to be mounted in one of two ways: with the second servo’s movement in the same plane as that of the first, or with the second servo perpendicular to the first. With several sets, you could have the beginnings of a robot snake project or an articulating neck for the Joinmax Digital gripper kit.
 |
| Joinmax Digital Elbow Joint Kit parts list (servo not included). |
 |
| Joinmax Digital Elbow Joint Kit assembly diagram. |
Note: Servos are not included with the Joinmax Digital elbow joint kit. Some assembly is required.
No recommended products at the moment.
No recommended products at the moment.
