Welcome, Guest ( My Account  |  View Cart  |  Login )
Shopping Cart Items: 0   Sub-Total : HK$0.00 View Cart

CHR-UM6-LT Orientation Sensor

CHR-UM6-LT Orientation Sensor
CHR-UM6-LT Orientation Sensor
CHR-UM6-LT Orientation Sensor
CHR-UM6-LT Orientation Sensor
CHR-UM6-LT Orientation Sensor
CHR-UM6-LT Orientation Sensor
CHR-UM6-LT Orientation Sensor

 

 
Our PriceHK$1,088.00
Retail Price HK$1,278.00
CodeASN-0124-003
Stock 1
Weight 10
No reviews
 
Save wishlist

CHR-UM6-LT Orientation Sensor

The UM6-LT ultra-miniature orientation sensor from CH Robotics is an OEM version of their UM6 orientation sensor, providing equivalent functionality without the enclosure or connectors. Like the UM6, it uses rate gyros, accelerometers, magnetic sensors, and an on-board 32-bit ARM Cortex processor to estimate sensor orientation at 1000 Hz. Sensor orientation is reported using either quaternions or Euler angles over a TTL serial interface at user-customizable rates.


Overview

The UM6-LT ultra-miniature orientation sensor - also known as an Attitude and Heading Reference System, or AHRS - from CH Robotics is an OEM version of their UM6 orientation sensor. Like the UM6, it uses rate gyros, accelerometers, magnetic sensors, and an on-board 32-bit ARM Cortex processor to estimate the absolute sensor orientation 1000 times per second. Sensor orientation is reported using either quaternions or Euler angles over a TTL serial interface at user-customizable rates. A USB-to-serial adapter can be used to connect the IMU to a computer running the free CH Robotics Serial Interface PC application, which allows for easy data visualization, board calibration, and UM6-LT settings configuration.

The UM6-LT is functionally identical to the UM6 (it uses the same firmware and works with the same PC software). The only difference is that the UM6-LT lacks the UM6's enclosure and 4-pin connector. Please see the UM6 product page or UM6/UM6-LT datasheet (618k pdf) for board specifications and usage information.

The UM6-LT is a pin-compatible replacement for the CHR-6dm AHRS sensor, which has been discontinued, so it can be physically swapped directly into systems that use the CHR-6dm. However, the UM6-LT uses the UM6 communication protocol, not the CHR-6dm protocol, so such a swap will require software modification.


Product Comparison

We offer several inertial measurement and orientation sensors made by CH Robotics. The table below compares their capabilities:

Product Name Sensors Estimation Other
Gyros (3x) Accels (3x) Mag (3x) Roll Pitch Yaw Quaternion Enclosure
CHR-6d IMU
CHR-6dm AHRS
CHR-UM6 Orientation Sensor

 

 



Dimensions

Size: 1.0" x 0.96" x 0.1"
Weight: 2.5 g

General specifications

Interface:

TTL serial

Baud:

115200 bps

Minimum operating voltage:

3.5 V

Maximum operating voltage:

5 V

Axes:

pitch (x), roll (y), and yaw (z)

Measurement range:

±2000°/s (gyro)
               ±2 g (accelerometer)

Supply current:

52 mA


File downloads

Datasheet for the CHR-UM6 orientation sensor(618k pdf)


Please review these other products:

 
CHR-6d Inertial Measurement Unit
View


Our Price: HK$980.00
Retail Price : HK$1,200.00

click to see more

 
 
CHR-6dm Attitude and Heading Reference System
View

Replaced by CHR-UM6-LT Orientation Sensor

Our Price: HK$1,729.00

click to see more

 
No recommended products at the moment.