Welcome, Guest ( My Account  |  View Cart  |  Login )
Shopping Cart Items: 0   Sub-Total : HK$0.00 View Cart

150:1 Micro Metal Gearmotor 6V, 100 rpm

150:1 Micro Metal Gearmotor 6V, 100 rpm
150:1 Micro Metal Gearmotor 6V, 100 rpm
150:1 Micro Metal Gearmotor 6V, 100 rpm
150:1 Micro Metal Gearmotor 6V, 100 rpm
150:1 Micro Metal Gearmotor 6V, 100 rpm
150:1 Micro Metal Gearmotor 6V, 100 rpm
150:1 Micro Metal Gearmotor 6V, 100 rpm

Product from China

*** Free motor mounting bracket included

 
Our PriceHK$90.00
CodeAMW-0101-106
Stock 10
Weight 10
No reviews
 
Save wishlist

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, standard power motor with 150:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 10mm-long, 3 mm-diameter D-shaped output shaft.

Key specs at 6 V: 100 RPM and 160 mA free-run, 3.2 kg-cm and 200mA stall.

Overview

These tiny, high-quality motors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 12 V range (rotation can start at voltages as low as 1.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios' from 5:1 up to 1000:1 and offer a choice between two different motors: high-power (HP) and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.

Some versions of the gearmotors are sold with an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add a custom-built encoder to provide motor speed or position feedback.

Gearmotor Dimensions

 

Micro metal gearmotor dimensions (units in mm).

 

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass face plate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g).




Motor Accessories

 

Pololu wheel 32 x 7mm on a micro metal gearmotor.
Pololu wheel 42 x 19mm with micro metal gearmotor.
A pair of Pololu universal aluminum mounting hubs for 3 mm shaft.

 

Black Pololu 70 x 8mm wheel on a Pololu micro metal gearmotor.
Black Pololu 90 x 10mm wheel on a Pololu micro metal gearmotor.
Pololu 30T track set with drive sprocket mounted on a micro metal gearmotor to the left; idler sprocket is on the right.
  • Mounting Brackets: Our mounting bracket (also available in white) and extended mounting bracket are specifically designed to securely mount the gearmotor while enclosing the exposed gears. We recommend the extended mounting bracket for wheels with recessed hubs, such as the Pololu wheel 42 x 19mm.
  • Quadrature Encoder: We offer a quadrature encoder for this motor that works with our extended bracket and 42 x 19mm wheel and provides feedback about wheel rotation (direction and speed). The encoder can be purchased as an individual unit or as part of an encoder set that includes two encoders, a pair of extended brackets, and a pair of 42 x 19mm wheels' just pick the particular micro metal gearmotor that best suits your application and you have a solution for closed-loop motor control.
  • Motor Controllers: We have a number of motor controllers that make it easy to drive these micro metal gearmotors, including our qik 2s9v1 dual serial motor controller and our programmable Baby Orangutan and Orangutan SVP robot controllers. The inexpensive qik 2s9v1 allows variable speed and direction control of two small, brushed DC motors using a simple serial interface; the Orangutans combine a programmable Atmel AVR microcontroller and dual motor driver all in a single package and make interfacing with the motor drivers simple when you use our Pololu AVR library. All of the above controllers use the TB6612FNG dual motor driver, for which we also offer a simple carrier board.


Pololu qik 2s9v1 dual serial motor controller.
Baby Orangutan B-48/B-168/B-328.
TB6612FNG dual motor driver carrier.

 

No recommended products at the moment.
No recommended products at the moment.