Robodyssey Advanced Motherboard II Kit

Features:

• Convenient Signal & Power Pins
Each I/O Pin has adjacent positive and negative terminals for convenient 3 pin connections. Servo connectors fit perfectly.
• Prototyping Signal & Power Pins
All 16 of the BX-24’s standard pins, and one each of the regulated and unregulated power pins have a built in female socket to allow direct wire connection for easy prototyping and breadboarding.
• Positive Pin Orientation
Futaba servos can’t plug in backwards with our pin guides.
• Jumper Selectable Separate Power Supply
Choose if you want to have a separate power supply for your motors and devices.
• 5V Regulated Power
Your microcontroller and half of the I/O power pins are connected to a 5V voltage regulator. The remaining half of the pins are connected directly to your power source.
• Serial DB9 Connector
Quickly upload new programs, or debug your code through the serial port with this convenient connector.
• On/Off & Reset Switches
Convenient power switches allow you to turn on or off each separate power source. No need to hold your robot down while up-loading code!
• Split Power Indicators
The Motherboard features two LED’s, one indicates microcontroller operation and regulated 5 volt activation, while the other indicates secondary power supply activation.
• Direct Connect for LCD Displays
Easy access to signal power and ground for the connection of external serial devices.
• Noise Reducing Capacitors
Avoid signal noise in your projects with filter capacitors on the Motherboard.
• Compact Size
The Robodyssey Advanced Motherboard is very compact. The unassembled board is jut 2.5 x 1.9 inches. Fully assembeld it grows to just 2.8 x 1.9 inches