BlueBoard-LPC214X-H is a breakout board for LPC2148 ARM7TMDI based microcontroller. The LPC2148 microcontroller has 512KB of internal flash and 32+8K RAM, can be clocked up to 60Mhz. LPC2148 features include USB 2.0 device, 2xUARTs, RTC, 2x10bit ADCs each ADC has multiple channels, 1xDAC, 6XPWM, 2xI2C, 1xSPI, 1xssP, 2x32-bit TIMERS, FAST I/0 support and WDT. LPC2148 also supports In System Programming (ISP)
Following are the salient features of the board:
- Dimensions: 85.95x53.62 mm2
- Two layer PCB (FR-4 material)
- Power: USB powered
- ISP and reset switch
- Test LED
- 32Khz crystal for RTC
- Extension headers for all microcontroller pins
- 1 RS232 port for ISP
- USB B-type connector with Link-LED
- 20pin - JTAG connector
Schematics
User Manual
What tools to use?
Our products are in general not tied up to one particular tool. All the tools that support LPC2000 ARM7 series of micro controllers can be used, to name a few:
- KEIL uvision4 IDE a 32K code limited version could be used
- Rowley Crossworks comes with 30 day evaluation version
- IAR workbench a 32K code limited version could be used
- And off course GCC based open source tool chains
- For those who wish to program (hex files) using
parallel port programmer could consider H-JTAG
How to program the board?
There are various options:
- JTAG interface:
parallel port programmer or
NGX ARM USB JTAG
- ISP programming: Programming through the on chip boot loader using UART interface and Flash Magic
-
USB secondary bootloader
No recommended products at the moment.
No recommended products at the moment.
